Manual Startup; Manual Shutdown; Connecting The Terminal Power Pack - VeriFone T650p Installation Manual

NOTE

Manual Startup

NOTE

Manual Shutdown

NOTE
Connecting the
Terminal Power
Pack
CAUTION
WARNING
•
Activates when the battery is left in an unused device for an extended
period
•
Charge the T650p device for eight hours before initial use.
•
Disconnecting and unplugging the device power pack, reduces the life of the
coin cell battery, which does not recharge and must be replaced if drained.
•
Conserve battery power by turning the T650p device off when not in use. Do
not let the battery charge fall below 10% for an extended period of time as
this may permanently diminish the battery capacity. Recharge the battery by
attaching the USB-C end of the power pack to the device and plugging the
other end of the power pack into a wall
Hold the start button for about 3 seconds until the device displays the startup
screen.
Once the device is powered up, The Verifone ADK MAC screen is displayed.
Hold the start button for about 1 second until the message is displayed on the
screen. Touch the "Off" selection to turn off.
The screen is blank when the device has no power.
Connect the T650p device to the provided USB cable and insert the other end into
any USB charger head for initial charging.
Using an incorrectly rated power supply may damage the device or cause it not
to work as specified. Before troubleshooting, ensure that the power supply being
used to power the device matches the requirements specified on the bottom of
the device. (See Specifications
use any standard USB charger.
Do not plug the power pack into an outdoor outlet or operate the device outdoors.
During a transaction, disconnecting the power by unplugging the device from a
wall power while at very low battery charge may cause transaction data files not
yet stored in the device memory to be lost.
Each T650p device comes with a power supply cable, USB-A to USB-C cable is
used to connect the device directly to an USB outlet to charge the battery. The
T650p unit is equipped with an USB capable universal port.
outlet.
for detailed power supply specifications.) You can
D
EVICE

Connecting the Terminal Power Pack

T650 I G
P NSTALLATION UIDE
S
ETUP
19