Manual Reception From The Pop Server - Panasonic DP-1810F Operating Instructions Manual

Receiving Documents via LAN
Receiving Email from a POP Server
Unattended Reception from the POP Server
When the Fax Parameter No. 146 (POP TIMER) is set to a value between 1 and 60 minutes, and Fax
Parameter No. 147 (AUTO POP RCV) is set to "2:Valid", the machine will query the POP server at the
specified interval for new mail.
Any mail on the POP server is retrieved and printed unattended.
1 NEW MAIL(S)
When the Fax Parameter No. 146 (POP TIMER) is set to "0", the machine will not query the POP server and
the mail is not retrieved automatically. With this setting, mail must be retrieved manually from the POP
server.
dd-MMM-yyyy 17:15
< NEW MAIL(S)>
When the Fax Parameter No. 147 (AUTO POP RCV) is set to "1:Invalid", the machine will query the POP
server for new mail at the interval specified by Fax Parameter No. 146. If new mail has arrived at POP
server, the machine will not retrieve it, but displays the number of mails on the POP server.

Manual Reception from the POP Server

To receive manually from the POP server, follow the Steps below:
Make sure that the FAX/EMAIL lamp is ON. If not, press
1
2
3
NOTE
78
If the POP server has not received any new mail, the
following message is displayed.
If POP server received new mail, the machine will display
the number of mails on the server, then receive and print
the email.
1. If you program a user name and password in the Program key, you can receive mail from the
POP server using a user name other than the name set as the user parameter.
2. The number of emails that can be retrieved during a single operation is 20. Even if POP server
has more than 20 emails, only 20 will be displayed on the machine. After retrieving the first 20
emails, repeat the procedure from beginning to ensure all emails were retrieved from the POP
server.
to select the "FAX/EMAIL" mode.
dd-MMM-yyyy 17:15
or
dd-MMM-yyyy 17:15
< NEW MAIL(S)>
NO NEW MAIL
ON LINE * RCV *
ID:abc@panasonic.com
00%