Pre Installation Information - Panasonic DP-1810F Operating Instructions Manual

Pre Installation Information

Before setting up your Panasonic machine on your network, please read this entire section to be familiar
with its functions.
Your machine is able to perform the following when connected to a 10Base-T/100Base-TX Ethernet LAN
(local area network):
• Send paper-based information as an Internet Email.
• Receive and print an Internet Email automatically.
• Forward received G3 fax message or Email automatically to the preprogrammed Email address or regular
G3 fax machine (see "Fax Forward" on pages 95).
• Route received G3 fax message automatically to the sender-specified Email address or G3 fax machine
using ITU-T SUB-Address (see "Inbound Routing" on pages 91 to 94).
• Route received G3 fax messages automatically to the preprogrammed Email address or G3 fax machine
using the sender's fax ID code (see "Inbound Routing" on pages 91 to 94).
• Relay an Internet Email to a G3 fax machine via regular fax transmission (see "Relayed Transmission" on
pages 100 to 111).
• Network scanning and printing.
To utilize the above functions, your machine needs to be set up properly on your network. Please contact
your network administrator for actual network setup.
Copy the Pre-installation Information form found at the end of this section on page 15, record the MAC
Address on the form and ask your network administrator to complete the remaining information on the form.
The MAC Address of your machine can be found on the 2nd page of the Fax Parameter List printout (press
FUNCTION 6 4
Your machine can be set up as either SMTP mail server or POP3 client. Dependent on the type of setup,
different functions are available as follows.
Sending paper-based information as an Internet Email
Receive and print an Internet Email automatically
Receive and print an Internet Email manually
Forward received G3 fax message or Email automatically
Route received G3 fax message automatically
Relay an Internet Email to G3 fax machine
NOTE
12
).
SET
Function
1. To function as SMTP mail server, your machine's email address must include its unique Host
name within your company domain. This unique Host name must be registered within your
network's DNS (Domain Name System) server. Example: Internet_Fax@fax01.panasonic.com
2. Automatically refers to immediate SMTP transfer or immediate POP3 retrieval. Manually
refers to manual retrieval of mail when configured as POP3 client.
3. Your machine will receive, print, forward or relay emails in text message format and TIFF-F
image file attachment only.
4. Dynamic Host Configuration Protocol (DHCP) is not supported.
SMTP Server Setup POP3 Client Setup
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No