Setup As Pop3 Client - Panasonic DP-1810F Operating Instructions Manual

Pre Installation Information

Setup as POP3 Client

To install your machine as POP3 Client, the following network parameters need to be programmed on your
network.
• IP Address of the DNS Server (if not available, see Note 2)
• IP Address of your machine
• Subnet Mask of your machine
• Name or IP Address of the Default SMTP mail server
• IP Address of the Default Router
• POP Server Name or IP Address
• POP User Account Name
• POP Password
• Email Address of your machine (see Note 1)
Email Transmission (from your machine to a PC)
Email Reception (from a PC to your machine)
NOTE
14
ifaxuser@fax01.panasonic.com
popuser001@panasonic.com
ifaxuser@panasonic.com
(Router)
popuser001@panasonic.com
1. The email address format can be the same as your regular email address. If your email
address is popuser001@panasonic.com,
Internet_Fax@panasonic.com.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP and POP Server Names. If the DNS Server is not available, change the Fax
Parameter No. 161 (DNS SERVER) to "1:Invalid". Then the machine will prompt you to enter
the IP Address of the SMTP and POP Servers.
(Router)
SMTP
POP3
SMTP
POP3
your
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
machine's email address can be