Abbreviated Email Addressing - Panasonic DP-1810F Operating Instructions Manual

Abbreviated Email Addressing

Abbreviated dialling / addressing is a fast way of dialling full telephone numbers or email addresses. To use
these dialling or addressing methods, you must first store the telephone numbers or email addresses into
the Auto Dialler with a 3-digit abbreviated code. (See page 47)
Make sure that the FAX/EMAIL lamp is ON. If not, press
1a
Place original(s) face up on the ADF.
or
1b
Place a book or an original face down on the Platen Glass.
1
Press
2
2
Press
ABBR
100).
Ex:
If a telephone number is stored into the ABBR station, the
display shows:
3
The document(s) is stored into memory with a file number.
Then connects to the LAN and starts sending the email
message.
1. If your machine sounds an alarm (pi-pi-pi) in Step 2 above, this indicates that the File Storage
NOTE
is Full (more than 30 full email addresses are entered or 50 transmission reservations including
G3 communication have been already reserved).
2. If the transmission cannot be completed for any reason, the email may be returned
undelivered; otherwise no reply will be printed.
to select the original size.
ORIGINAL SIZE
and then enter a 3-digit code (001 to
.
Sending Documents via LAN
to select the "FAX/EMAIL" mode.
ENTER STATION(S)
THEN PRESS START 00%
[100](Station name)
xyz@panasonic.com
[100](Station name)
5553456
* STORE * NO.001
PAGES=001 01%
* STORE * COMPLETED
TOTAL PAGE=005 25%
ON LINE * MEM.MXT *
ID:(Station name)
63