Manual Reception From The Pop Server - Panasonic DP-2330 Operating Instructions Manual

Receiving Documents via LAN
Receiving Email from a POP Server
Unattended Reception from the POP Server
When the Fax Parameter No. 146 (POP TIMER) is set to a value between 1 and 60 minutes, and Fax
Parameter No. 147 (AUTO POP Receive) is set to "2:Valid", the machine will query the POP server at the
specified interval for new mail.
Any mail on the POP server is retrieved and printed unattended.
When the Fax Parameter No. 146 (POP TIMER) is set to "0", the machine will not query the POP server and
the mail is not retrieved automatically. With this setting, mail must be retrieved manually from the POP
server.
When the Fax Parameter No. 147 (AUTO POP Receive) is set to "1:Invalid", the machine will query the
POP server for new mail at the interval specified by Fax Parameter No. 146. If new mail has arrived at POP
server, the machine will not retrieve it, but displays the number of mails on the POP server.

Manual Reception from the POP Server

To receive manually from the POP server, follow the steps below:
1
2
3
NOTE
140
MODE SETTING
GET EMAIL
If the POP server has not received any new mail, the following message is
displayed.
If POP server received new mail, the machine will display the number of mails
on the server, then receive and print the email.
1. If you program a user name and password in the Program key, you can receive mail from the
POP server using a user name other than the name set as the user parameter.
2. If the machine is in the Shutdown mode, it can not wakeup when receiving Email.
POP Receive
No New Mail
FILE TYPE
AND NAME
POP Receive
1 New Mail(s)
FILE TYPE
AND NAME