Sender Selection; General Description; Setting The Sender Selection - Panasonic DP-1810F Operating Instructions Manual

Sender Selection

General Description

This operation allows the user to select one of the 25 preset User Names and Email Addresses before a
transmission. The selected User Names is printed on the Header of each page sent and on the COMM.
Journal. When sending email, the selected user name and/or email address appears in the "From:" field of
the email message.

Setting the Sender Selection

Make sure that the FAX/EMAIL lamp is ON. If not, press
1
2
3
.
4
5
6
Enter the Sender Selection number.
Ex:
1
7
Enter your User Name (up to 25 characters and digits) by
using character keys. (See page 44)
Ex:
P A N A S O N I C MONITOR
S A L E S
Continued on the next page...
(01 to 24)
2
and
SET
to select the "FAX/EMAIL" mode.
(See Note 1)
SET MODE (1-4)
∨ ∧
ENTER NO. OR
FAX PARAMETER(1-164)
NO.=❚
145 SENDER SELECTION
1:INVALID
145 SENDER SELECTION
2:VALID
SENDER SELECTION
∨ ∧
ENTER NO. OR
ENTER USER NAME
12 ❚
ENTER USER NAME
12 PANASONIC SALES❚
85