Panasonic DP-1810F Operating Instructions Manual page 42

Programming or Retrieving Parameters via Email
To Edit the Retrieved or Backup One-Touch/ABBR. No. Data File
Explanation of Contents
(1) To
From
Subject
(2) @begin to @end block
(3) @program to @end
(4) These 2 One-Touch/ABBR. No. stations were added to the list.
(5) This header must be deleted before the email is sent to your machine for reprogramming of One-Touch/ABBR. No.
The information following the "#" sign is ignored by your machine, therefore, you can leave it as is or delete it if you
wish.
42
: Your machine's email address.
: This field is normally not visible when creating new email message(s).
It is your default email address (email application), for retrieving the One-Touch/
ABBR. No. data and for error message notification.
(Can be programmed with the configuration tool of your email program.)
: To Store data, type: #set abbr(password)#
: Defines the One-Touch Keys, Abbreviated Dialling Numbers and Program Keys
stored as a One-Touch Key to be set in section (3) between @begin to @end
block.
Edit, Delete or Register the information.
Separate each data field with a semicolon (;). (If the remaining fields are to remain
blank, insert a semicolon (;) for each blank field)
The data string for each station should be defined within a single line.
The syntax is: <Entry-number>; <Station-name>; <Station-address>; <Routing-
subaddress>; <Routing-id-number>
(a) Entry-number: One-Touch, ABBR. No. or Program Keys to be programmed
001 to 100: indicates ABBR. No.s 001 to 100
(100 stations maximum)
1001 to 1058: indicates One-Touch numbers from 01 to 58
2001 to 2008: indicates Program Keys (P1 to P8
programmed as One-Touch dialling number)
(b) Station-name: Name of the station being programmed (15 alpha-numeric
characters maximum)
(c) Station-address: email address or telephone number of the station being
programmed
(d) Routing-subaddress: sub-address to be used for routing (20-digit maximum)
(e) Routing-id-number: TSI to be used for routing (20-digit maximum)
(f) The End Receiving Station's telephone number is entered after the hash sign
(#)
: Defines the Program Keys stored as a Group Key or POP Access Key to be set in
section (4) between @program to @end block.
Edit, Delete or Register the information.
(a) Program Key: P01 - P08
(b) Station-name as a Group Key: Name of the station being programmed (15
alpha-numeric characters maximum)
(c) GROUP: The syntax used to set the Program Key as a Group Key
(d) Entry-number: One-Touch, ABBR. No. to be programmed
001 to 100: indicates ABBR. No.s 001 to 100
(100 stations maximum)
1001 to 1058: indicates One-Touch numbers from 01 to 58
2001 to 2008: indicates Program Keys (P1 to P8
programmed as One-Touch dialling number)
(e) POP: The syntax used to set the Program Key as a POP Access Key
(f) POP User-name: Name of the POP user account (40 alpha-numeric characters
maximum)
(g) POP Password: POP Password (10 alpha-numeric characters maximum)
(h) Set whether the emails on the POP Server are deleted after retrieving the
emails.