Sending Document with Sender Selection
Make sure that the FAX/EMAIL lamp is ON. If not, press
1a
Place original(s) face up on the ADF.
or
1b
Place a book or an original face down on the Platen Glass.
1
Press
2
2
Enter email address or telephone number.
3
4
Enter a number or use
that you want to use. (See Note 2)
Ex:
1
2
5
The document is sent as an email message with the
selected user name and/or email address appearing in
the "From" field of the email message.
1. The Sender Selection function cannot be used in the Voice Dialling Mode for ordinary
NOTE
transmission.
2. If you do no select a User Name in the Step 4, the unit selects the default User Name (00) that
was programmed in the User Parameters for ordinary transmission.
to select the original size.
ORIGINAL SIZE
or
to select the User Name
Sender Selection
to select the "FAX/EMAIL" mode.
ENTER STATION(S)
THEN PRESS START 00%
SELECT SENDER(00-24)
∨ ∧
ENTER NO. OR
12 PANASONIC SALES
abc@panasonic.com
87