Internet Fax A3/Ledger Size Document Transmission - Panasonic DP-1810F Operating Instructions Manual

Sending Documents via LAN

Internet Fax A3/Ledger Size Document Transmission

When transmitting via LAN, the transmitter is incapable of identifying the receiver's recording paper size
capability, and thus it will not reduce the document size during transmission. Therefore, it is recommended
that you send only A4/Letter size documents for LAN transmission. If a A3/Ledger size document is
transmitted and the receiver is only able to print A4/Letter size documents, the communication will fail when
the temporary setting "08 LAN A3 XMT" of the Select Mode is set to its default position (ON).
To send without reduction, follow the Steps below.
Make sure that the FAX/EMAIL lamp is ON. If not, press
1a
1b
2
3
4
5
70
Place original(s) face up on the ADF.
or
Place a book or an original face down on the Platen Glass.
1
Press
ORIGINAL SIZE
2
Dial by any combination of the following methods:
• One-Touch Dialling
• Abbreviated Dialling
• Directory Search Dialling, press
email address is entered.
• Manual Number Dialling, press
station is entered (up to 30 addresses).
Ex:
01
to select the original size.
after each
SET
after each
SET
to select the "FAX/EMAIL" mode.
SELECT MODE
∨ ∧
ENTER NO. OR
LAN A3 XMT=OFF
1:OFF 2:ON
LAN A3 XMT=ON
1:OFF 2:ON
<01>(Station name)
panasonic.usa@panas
(1-8)