Programming or Retrieving Parameters via Email
Using Email to Retrieve the Journal
To retrieve the existing Journal data, send an email to your machine's email address with the following
command in the "Subject" line:
#get jnl(password)#
The Journal will be send back to the originating station's email address.
After receiving the journal, use a fixed width font (i.e. Courier), in order to align the received journal's
contents on the PC.
A separate email message is sent by your machine, an "Internet Fax Return Receipt" to the Manager's
email address programmed in the User Parameters, informing of the Journal transfer.
1. To activate this feature, change the Fax Parameter No. 158 (PC REMOTE UPDATE) to "Valid".
NOTE
(See page 57)
:
where the "password" is the Remote Password programmed in your
machine's User Parameters (i.e. 123456789).
43