Deleting The Entire Auto Dialler - Panasonic DP-1810F Operating Instructions Manual

Programming or Retrieving Parameters via Email

Deleting the Entire Auto Dialler

If you wish to delete the entire Auto Dialler data in your machine, type the following command in the body of
the email message:
@command
delete
@end
This command can also be inserted before the @begin to @end block, to erase the entire Auto Dialler data
first, then reprogramming it with new data.
This method will also prevent the "Overwrite Warning Message" that is sent back from your machine, when
the current Auto Dialler station is overwritten.
To erase the entire Auto Dialler data, type the following command in the "Subject" line of your email:
#set abbr(password)#
36
: where the password is the Remote Password programmed in your
machine's User Parameters.
Retrieve and backup the existing data onto your PC first by following
the procedures for Retrieving and Editing on pages 39 to 42.