Printer Reset Items; Support Function Item; Printer Adjustment Function Items; Usb I/F Setup Items - Epson AcuLaser CX11 Service Manual

Color multi-function page printer
Hide thumbs Also See for AcuLaser CX11:
Table of Contents

Advertisement

EPSON AcuLaser CX11/CX11F

PRINTER RESET ITEMS

Setup menu
Clear warning
Clear all warning
Reset
Restart Unit
Factory Settings
Change Toner C
Change Toner M
Change Toner Y
Change Toner K
Reset Fuser Counter

SUPPORT FUNCTION ITEM

Setup menu
Setup items
LCD Backlight
Auto, On, Off

PRINTER ADJUSTMENT FUNCTION ITEMS

Setup menu
Setup items
Normal
0 - 5 - 15
SemiThk
0 - 5 - 15
Thick
0 - 5 - 15
ExtraThk
0 - 5 - 15
Card
0 - 5 - 15
Envelope
0 - 5 - 15
Feed offset
-3.5 - 0.0 - 3.5 mm
Scan offset
-3.5 - 0.0 - 3.5 mm
Calibration
Remarks
---
---
---
Reboot
---
---
---
---
---
Overseas destinations only
Remarks
---
Remarks
---
---
---
---
---
---
(mm) The printer reboots.
(mm) The printer reboots.
---
---

USB I/F SETUP ITEMS

Setup menu
*1
USB I/F
*1
USB speed
*2
USB Extl/FConfg
*3
Get IPAddress
*3, 4, 5
IP
*3
SM
*3
GW
*3
NetWare
*3
AppleTalk
*3
MS Network
*3
Rendezvous
*3
USB Extl/F Init
Note *1: After this item is changed, the setting value takes effect after a warm boot or after the
power is turned on again. While it is reflected in the Status Sheet and EJL read-back,
the actual change takes effect after a warm boot or after the power is turned on again.
*2: Displayed only when the D4 support USB external device is connected.Changed to
"USB Config=No" automatically when exitting the setup mode.
*3: Displayed only when the D4 support USB external device is connected, and "USB
external device=Yes". Content of the setting depends on the USB external device
settings.
*4: The actual valid value is displayed (but cannot be changed) when "Get IPAddress =
Auto".
*5: When the "IP Adress" - "Panel" or "PING" is changed to "Auto", the setting value of
the "Panel" or "PING" is memorized and it is restored and displayed on the panel
when the setting is changed back to "Panel" or "PING". The printer displays
"192.168.192.168" if the settings are not made from the panel.
manuals4you.com
manuals4you.com
Remarks
Yes, No
HS, FS
Yes, No
Panel, Auto, Ping
0.0.0.0 - 255.255.255.255
0.0.0.0 - 255.255.255.255
0.0.0.0 - 255.255.255.255
On, Off
On, Off
On, Off
On, Off
---
Revision B
66

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aculaser cx11f

Table of Contents