Fax Mode - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

1.3.2.2 Fax Mode

BUTTON FUNCTIONS
Button name
Copy button Moves to copy mode
FAX button Moves to print mode
Scan button Moves to print mode
Setup button Moves to setup mode
One touch speed dial A 1. Short press: Dials the registered number.
One touch speed dial B
2. Long press (hold for more than three seconds): Prompts the user to register new numbers.
One touch speed dial C
Advanced/Menu button When verifying speed dial numbers: Displays details on speed dial numbers.
Reset button 1. Short press: Performs initialization
2. Long press (hold for more than three seconds): Perform initialization for all the settings
3. Cursor function: Deletes one character
4. Selecting speed dial numbers: Moves to fax initial screen
Up button Changes setup items
/Down button
Left button 1. Menu: Changes setup items
/Right button
2. Cursor function: Moves cursor
Speed dial button Fax mode initial screen - Speed dial transmission - Group dial transmission - Fax mode initial screen Invalid
Redial button 1. During dialing: inserts a pause
2. Before dialing: dials the number that was last entered
Cancel button Invalid
Asterisk/Hash buttons Dial setup
Ten-key Dial setup
Start Buttons Starts scanning. Starts receiving fax when the fax is send during using the attached phone
with the reception mode set to auto switch or phone only.
Other conditions: starts scanning
Note *1: Switching operation mode is available while sending fax, waiting for sending fax,
and polling.
*2: Depending on the receiver, fax data transmitted in color may be converted into
monochrome.
Idling Scanning
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
When scanning is in progress, the job is
canceled and already scanned and
temporarily stored pages are deleted.
Invalid
Invalid
Invalid
*3: All the modes become inoperative when system error occurred.
*4: If the error that requires user intervention to be cleared has occurred, users cannot
switch modes until they cancel the error.
is diagnosed as device failure at start-up, switching between modes is impossible.
Revision B
FAX
Moves to copy mode. In copy mode, switch to
print mode.
Unable to move to fax mode.
In fax mode, switch to print mode.
Moves to scan mode
In scan mode, switch to print mode.
Moves to setup mode.
In setup mode, switch to print mode.
Does not shift to fax mode and dial
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Clears the error
Fax initialization
If there is an error concerning device that
55