EPSON AcuLaser CX11/CX11F
FIP-69
Panel Message
Worn Photoconductor
Possible parts that caused the error
Photoconductor Unit
HARNESS-ASSY XERO
LV/HVPS
Troubleshooting
Step
Check
Attachment check of Photoconductor Unit
1
Is Photoconductor Unit attached correctly?
Does the error recur when the power is
2
turned ON?
Check after replacement of Photoconductor
3
Unit
Replace Photoconductor Unit.
Does the error occur when the power is turned
ON?
Operation check of ANTENNA CTRG
4
Disconnect the P/J416 from the PWBA MCU.
Does the error recur when the power is turned
ON?
TROUBLESHOOTING
GUIDE CRU ASSY D or ANTENNA ASSY
PWBA MCU
Yes
Go to Step [3].
Re-attach, and go
to step [2].
Go to Step [3].
End of procedure
Go to Step [4].
End of procedure
Go to Step [6].
End of procedure
Step
Continuity check of HARNESS-ASSY
5
XERO
Disconnect the J416 from PWBA MCU.
Do all of the wiring below have normal
continuity?
J416-4 ↔ J109-2
J416-5 ↔ J109-1
Check after replacement of GUIDE CRU
6
ASSY D or ANTENNA ASSY
Replace GUIDE CRU ASSY D or ANTENNA
ASSY.
(p.388)
Does the error recur when the power is turned
No
ON?
Printer
manuals4you.com
manuals4you.com
Check
Yes
Go to Step [6].
Replace PWBA
MCU.
(p.432)
or
(p.391)
Revision B
No
Replace
HARNESS-
ASSY XERO.
End of procedure
242