Regular Replacement Parts - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

6.5.2 Regular Replacement Parts

Part Name Part Code
FUSER ASSY
2090471
K 1292991
HOUSING
ASSY-DEVE
Y 1292994
M 1292996
C 1292999
2ND BTR ASSY
1292981
MAINTENANCE
Table 6-6. Maintenance Information on Regular Replacement Parts
Life (Pages) Service life indication
Worn Fuser
100000
100000
Worn K Dev Unit
Worn Y Dev Unit
Worn M Dev Unit
66700 Worn C Dev Unit
100000
---
Consumables and Components needing Periodic Replacement
Part to be replaced
Remedy after Replacement
at the same time
2ND BTR ASSY Execute "Reset Fuser Counter" in
the Maintenance Menu to reset the
life counter.
PIVOT AD Execute "Reset X DvlpCounter"
(X=Y, M, C, or K) in the
PIVOT AD
Maintenance Menu to reset the life
PIVOT AD
counter.
After executing the counter reset,
PIVOT AD
open and close the Cover A. Do not
turn the printer off until the engine
completely stops.
FUSER ASSY Execute "Reset 2ndBTRCounter" in
the Maintenance Menu to reset the
life counter.
After executing the counter reset,
open and close the Cover A. Do not
turn the printer off until the engine
completely stops.
Revision B
Remarks
While it can still be printed, it is
desirable to replace the unit. If
printing is continued, a paper
jam will occur at the fusing
section frequently because the
wear of the heat roller shaft
increases the torque of the heat
roller.
While it can still be printed,
it is desirable to replace the
unit.
The "PIVOT AD" is packed
with the ASP "HOUSING
ASSY-DEVE".
While it can still be printed after
the message is displayed, it is
desirable to replace the unit.
563