Process Specifications & System; Printer Basic Specifications; First Print Time; Color Mode (Unit: Second Or Less) - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

1.2.2 Printer Section

1.2.2.1 Process Specifications & System
Printing method : Semiconductor laser beam scanning and dry
electrophotographic process with two ingredients
Light source : Semiconductor laser
Photoconductor : Organic photoconductor
Charging : Roller charging system
Development : Two ingredients, None-contact developing system
Toner : Made up of two nonmagnetic ingredients
Primary transfer : Intermediate transfer belt method
Fixing : Heat roller and fuser belt system

1.2.2.2 Printer Basic Specifications

RESOLUTION
600dpi

FIRST PRINT TIME

The time from receiving the Start command to when trailing edge of the paper leaves
the paper eject roller.
Note that the time given in the tables below does not apply when the printer is in the
conditions described in "1.2.2.7 Printer Engine Restrictions"
Table 1-12. Monochrome mode (Unit: second or less)
Paper size
A4
LT
Table 1-13. Color mode (Unit: second or less)
Paper size
Standard
Thick/Extra
Thick Paper
A4 17 27
LT 17 27
Revision B
(p39).
Simplex printing
Standard Low speed
9 17
9 17
Simplex printing
Low speed 1
Label/Coated Paper Envelop
24 27
24 27
Low
speed 2
28
28
29