Epson Stylus Pro 3800 Service Manual page 99

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4.3.3.4 HOUSING, FRONT, RIGHT
1. Open the STACKER, C.
2. Remove the screw that secures the HOUSING, FRONT, RIGHT to the main unit.
One C.B.P. 3 x 8 screw (6 ± 1 kgf.cm)
3. Pull the upper part of the HOUSING, FRONT, RIGHT toward you to release the
upper rib and the two lower tabs, and remove the HOUSING, FRONT, RIGHT.
Be sure to engage the two lower tabs with the cutouts, and align the
positioning socket with the rib on the main unit.
DISASSEMBLY & ASSEMBLY
STACKER, C
Disassembly/Assembly Procedure (Group 1)
HOUSING, FRONT, RIGHT
tabs
Figure 4-10. Removing the HOUSING, FRONT, RIGHT
Revision C
rib
C.B.P. 3x8
hooks
99