Epson Stylus Pro 3800 Service Manual page 151

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
5. Remove the two screws that secure the PUMP, CAP ASSY., and remove the
PUMP, CAP ASSY. upwards.
Two C.B.S. 3 x 6 screws (6 ± 1 kgf.cm)
Insert the two positioning holes of the PUMP, CAP ASSY. over the
guide pins on the FRAME ASSY., SUB, RIGHT to secure the
PUMP, CAP ASSY. See Figure 4-77.
Whenever the PUMP, CAP, ASSY., is replaced, the corresponding
A D J U S T M E N T
R E Q U I R E D
adjustments must be carried out. See Chapter 5
(p208).
<Adjustment Item>
1. Reset When Pump Motor Change
DISASSEMBLY & ASSEMBLY
"ADJUSTMENT"
Disassembly/Assembly Procedure (Group 1)
Right side of the printer
positioning point
C.B.S. 3x6
Figure 4-77. Removing the screws from the PUMP, CAP ASSY.
Figure 4-78. Removing the PUMP, CAP ASSY.
Revision C
PUMP, CAP ASSY.
PUMP, CAP ASSY.
151