Epson Stylus Pro 3800 Service Manual page 121

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
6. Remove the two screws that secure the MOTOR ASSY., APG to the FRAME ASSY.,
SUB, RIGHT. See Figure 4-40.
Two C.B.S. 3 x 6 screws (9 ± 1 kgf.cm)
7. Turn the MOTOR ASSY., APG in the direction of arrow in
the part that contacts with the FRAME ASSY., SUB RIGHT, and remove the
MOTOR ASSY., APG toward inside of the main unit.
When installing the MOTOR ASSY., APG, be careful of the
following.
The board-attached side must face upward.
Overhead view
MOTOR ASSY., APG
The screwing portions of the MOTOR ASSY., APG must come
to the outside of the main frame.
DISASSEMBLY & ASSEMBLY
Figure 4-40 to release
See Figure 4-40.
main frame
MOTOR ASSY., APG
Disassembly/Assembly Procedure (Group 1)
Right side of the printer
MOTOR ASSY., APG
Figure 4-40. Removing the screws from the MOTOR ASSY., APG
Revision C
C.B.S. 3x6
121