Epson Stylus Pro 3800 Service Manual page 65

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
Table 3-1. List of Panel Messages
Category Message on LCD
PAPER FEED ERROR
LOAD PAPER
CORRECTLY
PRESS THE
DOWN BUTTON
PAPER REMOVE
REMOVE PAPER
FROM THE REAR
PAPER ERROR
LOAD PAPER
PAPER SIZE ERROR
LOAD THE CORRECT SIZE
PAPER
PAPER SENSOR ERROR
PRESS THE BUTTON
LOAD DIFFERENT PAPER
PAPER SENSOR ERROR
Error
PRESS THE BUTTON
LOAD THE CORRECT PAPER
CLEANING ERROR
PRESS THE CANCEL/RESET
BUTTON
CLEANING ERROR
PRESS THE
DOWN BUTTON
AND REMOVE
THICK PAPER
PAPER SETTING ERROR
CHECK PAPER SOURCE IN
THE DRIVER SETTINGS
AND LOAD PAPER
CORRECTLY
TROUBLE SHOOTING
Ref.
Description
Page
A multi-feed was detected and the
papers were ejected automatically
without printing. p72
Failed to eject paper fed from the
rear manual tray. p72
No paper is detected.
p72
The size of loaded paper does not
match with the paper size setting. p72
The ink mark sensor sensitivity
adjustment could not be made. p72
Failed to determine the adjustment
value based on the result detected
by the ink mark sensor. (could not p73
determine, or the determined value
fell outside the adjustable range.)
Clogging nozzles are detected by
the nozzle check after running a p73
head cleaning.
A head cleaning was attempted with
a board paper loaded, or before
printing when the PW sensor was p73
OFF.
The paper has been loaded in the
tray that is different from the one
specified in the driver setting. p73
List of Panel Messages
Revision C
65