Epson Stylus Pro 3800 Service Manual page 111

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4.3.3.15 BASE, ENCLOSURE
1. Remove the HOUSING, REAR, ASSY.
2. Remove the HOUSING, FRONT, LEFT.
3. Remove the HOUSING, FRONT, RIGHT.
4. remove the COVER, PRINTER.
5. Remove the HOUSING, LEFT.
6. Remove the HOUSING, RIGHT.
7. Push outward on the circled points of the FRAME, PAPER, SUPPORT, REAR
shown in Figure 4-25 to widen it to disengage the four guide pins of the ASF,
ASSY, and remove the FRAME, PAPER, SUPPORT, REAR.
In step 8. and 9, do not remove the PAPER, GUIDE, LOWER,
C A U T I O N
LEFT/RIGHT forcibly as their hooks are easily broken.
8. Pull the PAPER, GUIDE, LOWER, LEFT first rearward and then upward to
release it from the eight hooks, and pull out the PAPER, GUIDE, LOWER, LEFT
from the back of the printer. See Figure 4-26.
9. Pull the PAPER, GUIDE, LOWER, RIGHT first rearward and then upward to
release it from the 10 hooks, and pull out the PAPER, GUIDE, LOWER, RIGHT
from the back of the printer. See Figure 4-26.
The ASF, ASSY. is temporally removed in
C H E C K
P O I N T positions of the hooks on the PAPER, GUIDE, LOWER, LEFT/
RIGHT. Note that the ASF, ASSY. is installed on the main unit
during the actual maintenance work.
When installing the PAPER, GUIDE, LOWER, LEFT and PAPER,
GUIDE, LOWER, RIGHT, make sure not to let the harnesses
caught between them, and secure them with the hooks.
DISASSEMBLY & ASSEMBLY
(p96)
(p98)
(p99)
(p100)
(p103)
(p104)
See Figure 4-25.
Figure 4-26 to show the
Disassembly/Assembly Procedure (Group 1)
guide pins
FRAME, PAPER, SUPPRT, REAR
Figure 4-25. Removing the FRAME, PAPER, SUPPORT, REAR
hook
PAPER, GUIDE, LOWER, RIGHT
Figure 4-26. Removing the PAPER, GUIDE, LOWER, LEFT/RIGHT
Revision C
guide pins
ASF, ASSY.
PAPER, GUIDE, LOWER, LEFT
111