Epson Stylus Pro 3800 Service Manual page 172

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
Procedure
1. Connect the FFCs (CN1, CN2) to the PRINT HEAD.
2. Install the PRINT HEAD to the CARRIAGE, ASSY.
3. Slide the GUIDE, TUBE, CR in the direction of the arrow to insert the two holes
of the GUIDE, TUBE, CR over the tabs of the CARRIAGE, ASSY. Make sure
that the positioning tab of the CARRIAGE, ASSY sticks out from the positioning
hole of the GUIDE, TUBE, CR.
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1)
HARNESS, HEAD, A/B
CN1
CN2
Figure 4-105. Installing the PRINT HEAD
Positioning tab and hole
Tabs and holes
Figure 4-106. Installing the GUIDE, TUBE, CR
Revision C
PRINT HEAD
GUIDE, TUBE, CR
172