Epson Stylus Pro 3800 Service Manual page 274

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
LUBRICATION POINTS
[Lubrication 1]
Part Name GUIDE PLATE, CR (FRAME, ASSY, MAIN)
Lubrication Point On the GUIDE PLATE, CR with where the CARRIAGE, ASSY
contacts.
Lubricants G-71
φ
Amount 2 mm x full length x 1 point
Remarks • Completely wipe any ink stains or dust off the lubrication point
with a cloth moistened with alcohol.
• Apply with a syringe. (Pin head:
MAINTENANCE
φ
2 mm)
GUIDE PLATE, CR
Lubrication
Point
[Lubrication 2]
Part Name PAPER GUIDE, UPPER, ASSY
Lubrication Point From the home position side, the first PAPER GUIDE, UPPER, ASSY.
(as seen from the rear of the printer). On the assy. with where the
release shaft contacts.
Lubricants G-26
φ
Amount 1. 2 mm x 7 mm x 1 point
φ
2. 2 mm x 5 mm x 1 point
Remarks Apply with a syringe. (Pin head:
Lubrication
φ
2 mm)
PAPER GUIDE,
UPPER, ASSY
Lubrication
Point 2
Lubrication
Point 1
Revision C
274