Epson Stylus Pro 3800 Service Manual page 69

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
Message on LCD
PAPER FEED ERROR Feeding board paper was physically interrupted.
LOAD PAPER CORRECTLY
AND PRESS PAPER/FEED
BUTTON
PAPER JAM
REMOVE PAPER
CANNOT OPEN COVER The cartridge cover cannot open due to an obstruction on the top of it.
IS THERE ANYTHING ON
THE PRINTER?
PRESS THE UP BUTTON
NOT ENOUGH The maintenance cartridge is near capacity. The available space may not be
EMPTY SPACE enough to continue the job.
REPLACE THE
MAINTENANCE
CARTRIDGE
NOT ENOUGH INK The ink cartridge is near empty.
REPLACE INK CARTRIDGE
WITH A NEW ONE
MAINTENANCE The installed maintenance cartridge is not the EPSON genuine cartridge.
PLEASE USE GENUINE
EPSON CARTRIDGES
MAINTENANCE
The installed maintenance cartridge is not the EPSON genuine cartridge.
NON-GENUINE
MAINTENANCE
CARTRIDGE INSTALLED.
MAINTENANCE CAPACITY
TO ABSORB INK MAY
VARY.
CONTINUE?
<YES NO>
MAINTENANCE CART. The maintenance Cartridge is full.
REPLACE MAINTENANCE
CARTRIDGE
TROUBLE SHOOTING
Description
The PE sensor still detects the paper after the PF motor has driven a
predetermined number of steps.
The Paper Feed/Down button was pressed three times to remove paper fed
from the rear manual tray.
Remedies for Error Messages
Remedy
Check if the paper is thicker than available thickness. Use paper of available
thickness.
Check the paper. If it is curled or creased, change it with a normal one.
Remove jammed paper, if any.
Check the connection between the PE sensor and the main board and fix any
abnormality.
Replace the PE sensor (PAPER, DETECTOR, ASSY).
See 4.4.1.4 PAPER, DETECTOR, ASSY. on page 203.
If any obstruction is observed, remove it.
Replace the maintenance cartridge with a new one.
Replace the ink cartridge with a new one.
Replace the maintenance cartridge with an EPSON genuine one.
After selecting "NO", replace the maintenance cartridge with a genuine one.
Replace the Maintenance Cartridge with a new one.
Revision C
69