Epson Stylus Pro 3800 Service Manual page 137

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
REASSEMBLY
GUIDE, STACKER, LEFT
1. Install the GUIDE, STACKER, LEFT so that the two points mentioned below are
securely engaged. See Figure 4-59.
Fig. GUIDE, STACKER, LEFT
A positioning tab
B positioning hole
2. Slide the GUIDE, STACKER, LEFT toward the rear of the printer.
Make sure that the cutout of the GUIDE, STACKER, LEFT is
C H E C K
P O I N T aligned with the screw hole on the main frame.
DISASSEMBLY & ASSEMBLY
Main unit
positioning hole
hook
GUIDE, STACKER, LEFT
Disassembly/Assembly Procedure (Group 1)
B
Figure 4-59. Installing the GUIDE, STACKER, LEFT
Revision C
A
137