Removing The Tower Case Cover - Gateway E-420 Maintaining & Troubleshooting

If you are installing externally accessible drives or replacing existing
6.
ones, remove the bezel by inserting a finger into each of the two
circular openings at the front of the computer, pushing in on the spring
clips, and pulling the upper portion of the bezel slightly forward to
release it.
Lift the bezel up until the bottom tabs release.
7.
Pull the bezel away from the computer.
8.

Removing the tower case cover

You need a grounding wrist strap and a Phillips screwdriver to open the
case.
Turn off the system and disconnect all power cords.
1.
To open the case
Case Access 7