Table of Contents
Advertisement
Remove the bezel.
A.
Push out the EMI shield in the bay.
B.
Remove the plastic drive bay cover on the front bezel. For
C.
information on removing the bezel, see the section "Removing the
mid-tower case cover" on page 6.
Place the new drive into the drive bracket through the front bezel.
5.
Secure the drive to the mounting bracket using four screws.
6.
Connect the power and data cables to the drive.
7.
Close the case, as described in Chapter 1.
8.
Reconnect the power cord and turn on the system.
9.
If the system does not recognize the new drive, see
"Peripheral/Adapter problems" on page 76.
System Components
41
Advertisement
Table of Contents
Troubleshooting
