Gateway E-420 Maintaining & Troubleshooting page 23

12 Maintaining and Troubleshooting Your E-4200 System
Place the left side panel on to the chassis and slide the panel toward the
2.
front of the chassis. Make sure the tab at the front of the panel fits
under the edge of the chassis.
Tabs
Replace the three screws that attach the left side panel to the chassis.
3.
Place the right side panel on to the chassis, making sure the panel fits
4.
into the rails on the chassis. Slide the panel toward the front of the
chassis until the tabs on the panel fit under the edge of the chassis.
Replace the three thumbscrews that attach the right side panel to the
5.
chassis.