Gateway E-420 Maintaining & Troubleshooting page 65

54 Maintaining and Troubleshooting Your E-4200 System
Slide the drive cage into the chassis, making sure to hook the tabs on
8.
the cage into the slots on the chassis. Replace the three screws that
attach the cage to the chassis.
Slots
Connect the cables to the drives in the bracket.
9.
If a card guide is included in your system, replace the add-in card
10.
guide and any add-in cards you removed.
Close the case as described in Chapter 1.
11.
Plug in the power cord and turn on the computer.
12.
If the system does not recognize the new drive, see "Hard disk problems"
on page 73 for troubleshooting information.