Gateway E-420 Maintaining & Troubleshooting page 35

24 Maintaining and Troubleshooting Your E-4200 System
Using a Phillips screwdriver, remove the screw that attaches the
A.
stability bar to the chassis.
Stability
bar
Screw
Lift the bar slightly and slide it towards the front of the chassis until
B.
the bar clears the hard drive cage. Lift the bar out of the chassis.
Remove the fan duct (mid-tower and tower only). Skip to step 5 if your
4.
system does not have a fan duct:
Grasp the sides of the fan duct.
A.
Hard drive
cage