Replacing The Hinge Cover - Gateway M275 Service Manual

Replacing Gateway M275 Components

Replacing the hinge cover

Tools you need to complete this task:
Screws removed during this task:
1 chrome 2.5 × 5 mm
(hinge cover)
To replace the hinge cover:
1
Complete the steps in
2
Turn the convertible tablet PC over so the top is facing up.
3
Remove the hinge cover screw from the back of the hinge.
16
Flat-blade driver
Phillips #0 screwdriver
"Preparing the convertible tablet PC" on page
Screw
www.gateway.com
- OR - Scribe or non-marring tool
6.