CHECKING AND LUBRICATING THE CABLES
CHECKING THE WHEELS/
EBS00116
CHECKING THE WHEELS
1. Check:
• wheel 1
Damage/bends → Replace.
NOTE:
_
Always balance the wheel when a tire or wheel
has been changed or replaced.
WARNING
_
• Never attempt even small repairs to the
wheel.
• Ride conservatively after installing a tire
to allow it to seat itself properly on the
rim.
EBS00117
CHECKING AND LUBRICATING THE
CABLES
WARNING
_
A damaged cable sheath may cause corro-
sion and interfere with the cable move-
ment. An unsafe condition may result, so
replace a damaged cable as soon as possi-
ble.
1. Check:
• cable sheath
Damage → Replace.
2. Check:
• cable operation
Unsmooth
replace.
Recommended lubricant
NOTE:
_
Hold the cable end up and apply several drops
of lubricant to the cable.
3. Apply:
• lithium-soap-based grease
(onto end of the cable)
3 - 65
CHK
ADJ
→
operation
Lubricate
Yamaha chain and cable lube or
engine oil
or