Front Arms And Front Shock Absorber - Yamaha YFM7FGPW Service Manual

FRONT ARMS AND FRONT SHOCK ABSORBER

A
ASSEMBLIES
4
5
6
5
7
4
8
7
0
9
6
c. Install the body 4, long bolt 5, base 6 and
attachment 7 onto ball joint.
d. Hold the body 4 in place while turning in
the long bolt 5 to remove the ball joint 0
from the front upper arm A.
e. Remove the ball joint remover.
f. Attach the assembled ball joint remover/
installer, new ball joint (with rubber boot and
retaining ring) B, installer spacer 8 and
installer washer 9 to the front upper arm
A.
NOTE:
_
• Do not tap or damage the top of the ball joint.
• Installer washer 9 must be aligned with the
projection on the head of the ball joint B.
g. Remove the ball joint remover.
h. Install a new circlip.
NOTE:
_
Always use a new ball joint set.
L LLL L LLL
8 - 50
CHAS
Ball joint remover
90890-01474, YM-01474
Ball joint remover attachment set
90890-01480
Ball joint adapter set
YM-01480
Body
Long bolt
Base
Remover
attachment
Installer spacer
Installer washer
L L LLL L L LLL L L LLL L
90890-01474
YM-01474
90890-01480
YM-01480
90890-01474
YM-01474
90890-01480
YM-01480
90890-01474
YM-01474
L LLL L LLL