Checking The Wheels; Checking The Wheel Hubs - Yamaha YFM7FGPW Service Manual

2
1
FRONT AND REAR WHEELS
EBS00383

CHECKING THE WHEELS

1. Check:
• wheels
2. Measure:
• wheel runout
Over the specified limit → Replace the
wheel or check the wheel bearing play 1.
3. Check:
• wheel balance
Out of balance → Adjust.
WARNING
_
After replacing the tire, ride conservatively
to allow the tire to be properly seated in the
rim. Failure to do so may cause an accident
resulting in vehicle damage and possible
operator injury.
EBS00385

CHECKING THE WHEEL HUBS

1. Check:
• wheel hubs 1
Cracks/damage → Replace.
• splines (wheel hub) 2
Wear/damage → Replace the wheel hub.
8 - 5
CHAS
Wheel runout limit
Front
Radial 2: 2.0 mm (0.08 in)
Lateral 3: 2.0 mm (0.08 in)
Rear
Radial 2: 2.0 mm (0.08 in)
Lateral 3: 2.0 mm (0.08 in)