Installing The Throttle Body Assembly - Yamaha YFM7FGPW Service Manual

b
1
1
a
b
THROTTLE BODY
M MMM
a. Wash the throttle body in a petroleum-
based solvent.
Do not use any caustic carburetor cleaning
solution.
b. Blow out all of the passages with com-
pressed air.
L LLL
INSTALLING THE THROTTLE BODY
a
ASSEMBLY
1. Install:
• throttle body joint 1
NOTE:
Align the projection a on the cylinder head
with the slot b in the throttle body joint.
2. Install:
• throttle body assembly 1
NOTE:
Align the projection a on the throttle body
assembly with the slot b in the throttle body
joint.
3. Connect:
• fuel hose
CAUTION:
When connecting the fuel hose, make sure
that it is securely connected, and that the
fuel hose connector cover is in the correct
position, otherwise the fuel hose will not be
properly connected.
NOTE:
To connect the fuel hose onto the throttle
body, slide the fuel hose connector cover 1 on
the end of the hose in direction of the arrow
shown.
6 - 37
M MMM M M MMM M M MMM M M MMM
L LLL L L LLL L L LLL L L LLL
FI
M M MMM M MMM
L L LLL L LLL