Yamaha YFM7FGPW Service Manual page 340

REAR CONSTANT VELOCITY JOINTS AND FINAL
DRIVE GEAR
6) Round off the hundredth digit and select the
appropriate shim(s). In the example above,
the calculated number is 5.16. The chart
g
instructs you to round off 6 to 5 at the hun-
dredth place.
Thus, the shim thickness is 5.15 mm.
Hundredths
0, 1, 2
3, 4, 5, 6, 7
8, 9
Shims are supplied in the following thick-
nesses.
Final driven pinion gear shim 1
Thickness (mm)
Final driven pinion gear shim 2
Thickness (mm)
NOTE:
Be sure to use one of each of the final driven
pinion gear shims 1 and 2 to obtain the shim
thickness.
L LLL L LLL L
7 - 28
DRIV
Rounded value
0
5
10
0.25 0.30 0.35
0.40 0.45 0.50
4.5 4.8
5.1 5.4
L LLL L L LLL L L LLL L L LLL L LLL