Draytek Vigor IPPBX 2820 Series User Manual page 73

Voice Mail Content
Virtual FAX
Configuration
VigorIPPBX 2820 Series User's Guide
want to check your voicemail, you can:
1. Dial to IP PBX trunk. Then AA will answer your code.
2. Enter this number (889).
3. The system asks you to input your extension number
(100).
4. The system asks you to input your voice mail PIN code.
Save voice message to USB disk – Check the box to save
the voice message to the USB disk connecting to Vigor
router.
Save voice message wav file to USB disk –Check the box
to save the voice message as wav file to the USB disk
connecting to Vigor router.
Send Voice Message by Email - IP PBX can send the
voice mail to the specified e-mail address for the incoming
call if you check this box.

Delete Voice Message after Sending Mail - IP PBX
can send the voice mail to the specified e-mail address
for the incoming call directly and delete the temporary
file in IP PBX if you check this box.
Days for keeping voice mail - Type the days for keeping
each voice mail.
Action when voice mail is full – There are two actions that
the router can use. Choose one of them to solve the problem
when the voice mail is full.
In USB disk, action when the number of voice messages
in a extension reached to 100 – There are two actions that
the router can use. Choose one of them to solve the problem
when the voice mails reached to 100 in specific extension.
Maximum message time - Type the recording length for
each voice mail.
Type the content of the voice mail.
Enable Virtual FAX – Check the box to enable such
function.
Extension Number – Type the extension number to offer
the FAX service, for Virtual FAX will be considered as an
extension.
Email to – Type the e-mail address which will receive the
FAX forwarded by VigorIPPBX 2820 whenever the router
gets it.
Test – Check the button to make a test.
Forward Fax file by Email – If it is checked, VigorIPPBX
will forward the FAX to the specified e-mail address.
Delete Fax file after Forwarding Mail - If it is checked,
65