Draytek Vigor IPPBX 2820 Series User Manual page 293

Remote Address
Edit
DiffServ CodePoint
Service Type
By the way, you can set up to 20 rules for one Class. If you want to edit an existed rule,
please select the radio button of that one and click Edit to open the rule edit page for
modification.
VigorIPPBX 2820 Series User's Guide
Click the Edit button to set the remote IP address (on
LAN/WAN) for the rule.
It allows you to edit source address information.
Address Type – Determine the address type for the
source address.
For Single Address, you have to fill in Start IP address.
For Range Address, you have to fill in Start IP address
and End IP address.
For Subnet Address, you have to fill in Start IP address
and Subnet Mask.
All the packets of data will be divided with different
levels and will be processed according to the level type by
the system. Please assign one of the levels of the data for
processing with QoS control.
It determines the service type of the data for processing
with QoS control. It can also be edited. You can choose
the predefined service type from the Service Type drop
down list. Those types are predefined in factory. Simply
choose the one that you want for using by current QoS.
285