Table of Contents
Advertisement
2.
Set the PSTN line of VigorIPPBX being able to receive the FAX. Open IPPBX
>>Trunks>>PSTN Trunks. Set T.38 Relay as FAX Mode for PSTN 1. Set the
answer mode for office hours and non-office hours as Forward to FAX --> Virtual
FAX1.
3.
After finished the above settings, you have completed the settings for receiving the
PSTN FAX. When there is any FAX into such PSTN line, VigorIPPBX 2820 will store
such FAX in USB disk. You can check the content of the FAX from VigorIPPX
configuration page. Open Advanced >> USB Application >> File Explorer and click
VFAX>> Inbox>> Ext-xxx. Here, you can see all of the FAX files stored in the disk.
4.
If you configure the settings to send the FAX to e-mail address, you will receive an
e-mail as the following. You can click the attached folder to check the content of the
FAX.
VigorIPPBX 2820 Series User's Guide
177
Advertisement
Table of Contents
