Table of Contents
Advertisement
FTP/Samba User
Username
Password
Confirm Password
Home Folder
Enable – Click this button to activate this profile (account) for
FTP service or Samba User service. Later, the user can use the
username specified in this page to login into FTP server.
Disable – Click this button to disable such profile.
Type the username for FTP/Samba users for accessing into FTP
server (USB storage disk). Be aware that users cannot access
into USB storage disk in anonymity. Later, you can open FTP
client software and type the username specified here for
accessing into USB storage diskette.
Note: "Admin" could not be typed here as username, for the
word is specified for accessing into web pages of Vigor router
only. Also, it is reserved for FTP firmware upgrade usage.
Note: FTP Passive mode is not supported by Vigor Router.
Please disable the mode on the FTP client.
Type the password for FTP/Samba users for accessing FTP
server. Later, you can open FTP client software and type the
password specified here for accessing into USB storage disk.
Type the password again to make confirmation.
It determines the folder for the client to access into.
The user can enter a directory name in this field. Then, after
clicking OK, the router will create the specific/new folder in
the USB storage disk. In addition, if the user types "/" here,
he/she can access into all of the disk folders and files in USB
storage disk.
Note: When write protect status for the USB storage disk is
ON, you cannot type any new folder name in this field. Only
"/" can be used in such case.
You can click
to open the following dialog to add any new
folder which can be specified as the Home Folder.
336
VigorIPPBX 2820 Series User's Guide
Advertisement
Table of Contents
