Draytek Vigor IPPBX 2820 Series User Manual page 113

Primary ISP Setup
IP Address Assignment
Method (IPCP) for
primary ISP setup
Secondary ISP Setup
IP Address Assignment
Method (IPCP) for
secondary ISP setup
After finishing all the settings here, please click OK to save the configuration.
VigorIPPBX 2820 Series User's Guide
disconnect after being idle for a preset amount of time. The
default is 180 seconds. If you set the time to 0, the ISDN
connection to the ISP will always remain on.
ISP Name - Enter your ISP name.
Dial Number -Enter the ISDN access number provided by
your ISP.
Username - Enter the username provided by your ISP.
Password - Enter the password provided by your ISP.
In most environments, you should not change these settings
as most ISPs provide a dynamic IP address for the router
when it connects to the ISP. If your ISP provides a fixed IP
address, check Yes and enter the IP address in the field of
Fixed IP Address.
ISP Name - Enter your ISP name.
Dial Number -Enter the ISDN access number provided by
your ISP.
Username - Enter the username provided by your ISP.
Password - Enter the password provided by your ISP.
In most environments, you should not change these settings
as most ISPs provide a dynamic IP address for the router
when it connects to the ISP. If your ISP provides a fixed IP
address, check Yes and enter the IP address in the field of
Fixed IP Address.
105