Table of Contents
Advertisement
Answer Mode
ISDN onnet CLIP format
ISDN Trunk Auto Hunt
Time budget (per day)
Enable Waiting Music
ISDN Settings
After finishing all the settings here, please click OK to save the configuration.
please go to IPPBX>PBX System> Phone
Setting page to change the port type.
Office hours - Set the answering mode for such outside line
in office time. You can specify it with Auto Attendant
(AA), or forward it to any Extension or Group directly.
Non-Office hours –Set the answering mode for such
outside line in non-office time. You can specify it with
Auto Attendant (AA), or forward it to any Extension or
Group directly.
Holiday - Set the answering mode for such outside line in
holiday. You can specify it with Auto Attendant (AA), or
forward it to any Extension or Group directly.
After choosing the answer mode, you have to specify the
right extension, or group from the drop down list next to the
answer mode selection.
Trunk_number*Caller_ID – It allows the user to select
the caller ID format including trunk number.
Caller_ID only – It allows the user to select the caller ID of
the peer side ( remote party ).
When both ISDN ports set to TE mode, you can specify an
auto hunt number. When people want to dial to ISDN
network via this number by using extension, the router will
auto hunt an available line for it.
Check the box to enable time budget function and configure
the time value.
If run out of budget, you can not make new call for this
trunk; the existing call will be dropped.
Check the box to enable the function of waiting music.
Then choose the music file (from user prompts) to play in
turn.
Note: This setting only affects on call involving this trunk;
the Music on Hold is system wide, it also works for
extension / extension call.
This link can connect to related configuration page for
ISDN.
44
VigorIPPBX 2820 Series User's Guide
Advertisement
Table of Contents
