Table of Contents
Advertisement
Get Community
Set Community
Manager Host IP
Trap Community
Notification Host IP
Trap Timeout
6
.
1
1
.
8
6
.
1
1
.
8
The Web Configurator may be used to restart your router. Click Reboot System from
System Maintenance to open the following page.
Index (1-15) in Schedule Setup - You can type in four sets of time schedule for performing
system reboot. All the schedules can be set previously in Applications >> Schedule web
page and you can use the number that you have set in that web page.
If you want to reboot the router using the current configuration, check Using current
configuration and click Reboot Now. To reset the router settings to default values, check
Using factory default configuration and click Reboot Now. The router will take 5 seconds
to reboot the system.
Note: When the system pops up Reboot System web page after you configure web settings,
please click Reboot Now to reboot your router for ensuring normal operation and
preventing unexpected errors of the router in the future.
VigorIPPBX 2820 Series User's Guide
R
e
b
o
o
t
S
y
s
t
e
m
R
e
b
o
o
t
S
y
s
t
e
m
Set the name for getting community by typing a proper
character. The default setting is public.
Set community by typing a proper name. The default
setting is private.
Set one host as the manager to execute SNMP function.
Please type in IP address to specify certain host.
Set trap community by typing a proper name. The default
setting is public.
Set the IP address of the host that will receive the trap
community.
The default setting is 10 seconds.
349
Advertisement
Table of Contents
