Printing A Self-Test; Configuring The Printer; Using The Printer Data Cables - Datamax PrintPAD CN70 User Manual

Printing a Self-Test

1. Open the printer's cover.
2. Press and hold the red self-test button for 4-5 seconds, until the printer starts to print (Figure 13).
Figure 13
3. After printing starts, release the red self-test button.

Configuring the Printer

The printer has many configurable settings. To configure or upgrade firmware, download the Windows configuration
program at www.datamax-oneil.com.

Using the Printer Data Cables

1. Select the appropriate cable for use with the host and/or device you are using.
2. Insert the plug into the printer's data port (Figure 14).
Figure 14
Note: Do not close the lid or damage will occur to the cable. The data cable is intended only for reflashing the
printer.
5
PrintPAD CN70 USER'S GUIDE