Škoda Information System - Skoda Rapid Owner's Manual

Škoda information system
ä
Introduction
This chapter contains information on the following subjects:
Overview of the multi-function display (MFD)
menu (multi-function display)
MFD
Operating the menus in the instrument cluster
With the ignition switched on, various driving and consumption data from the mul-
ti-function display (MFD) can be shown on the display.
The scope of the menus in the instrument cluster display depends on the vehicle
electronics and the equipment level of the vehicle.
A specialist garage may program or modify additional functions depending on the
vehicle equipment. Škoda recommends a Škoda partner for this purpose.
Some menu items can only be selected when the vehicle is stopped.
The display is located between the two horizontal lines of the display
The multi-function display (MFD) is switched by using the buttons on the wind-
screen wiper lever.
MFD menu (multi-function display)
ä
First read and observe the introductory information and safety warn-
ings on page 23.
To change between the two memories, press the
Single-trip memory.
1
Total-distance-driven
2
memory.
Vehicle overview Before driving
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
⇒ f ig. 9
button while the ignition is switched on and memory 1 or 2 is displayed.
OK
The memory collects driving and fuel consumption data from the time the ignition is switched on until it is switched off.
The memory is cleared automatically after the driving time is interrupted for more than two hours. If the drive continues within two
hours after the ignition was switched off, the new data will be added.
The memory collects the driving data of any number of single drives, depending on the model of the instrument cluster up to a total
of 19 hours and 59 minutes or 99 hours and 59 minutes driving time or 1999.9 miles (kilometres) or 9999 miles (km) distance travel-
led. If any of these maximum values is passed, the memory will automatically clear and start again from 0.
When driving
WARNING
Driver inattention can lead to accidents and injuries.
● Never select any menus in the instrument cluster while driving.
Overview of the multi-function display (MFD)
23
23
ä
First read and observe the introductory information and safety warn-
24
ings on page 23.
Driving time
■
■ Current fuel consumption
Average fuel consumption
■
■ Range
Distance travelled
■
■ Average speed
Digital speedometer
■
2 .
Speed warning
■
■ Outside temperature
The multi-function display (MFD) is equipped with two automatic memories:
1 – Single-trip memory and 2 - Total-distance-driven memory. The number of the
memory currently shown appears on the top right of the centre display.
Maintenance, cleaning, servic-
ing
Instrument cluster 23
Ð
Ð
£
Do-it-yourself