Skoda Rapid Owner's Manual page 24

22 Instrument cluster
Retrieving service message
The current service message can be checked with the ignition switched on, the
engine switched off and the vehicle stationary:
● Press the button in the instrument cluster repeatedly until the wrench

symbol  appears.
An overdue service is indicated by a minus sign in front of the mileage or number-
of-days indication. On vehicles with text messages in the instrument cluster dis-
play, Service since — miles or — days will appear.
Resetting service interval display
If the service was not carried out by a Škoda partner, the display can be reset as
follows:
On vehicles with text messages (MAXIDOT):
Select the Settings menu.
In the sub-menu, select the
Service Reset
Acknowledge the confirmation prompt with
On vehicles without text messages:
Switch off the ignition.
Press and hold the button.
0.0 / SET
Switch the ignition on again.
Release the button and press the
0.0 / SET
Do not reset the service display between service intervals, as this will result in in-
correct displays.
Note
The service message will extinguish after a few seconds with the engine running
or by pressing the button.
OK
menu item.
.
OK
button within approx. 20 seconds.

Ð