Auto White Display (Camera Mode Only); Menu Setting Screen; Alarm Display; Zebra Pattern Display - JVC LST0904-001B Instruction Manual

Introduction
Displays on the LCD
Monitor and Viewfinder
(continued)

Auto White Display (Camera Mode Only)

Displays the operation and result when Auto White Balance
is activated.
(A Page 40 [Adjusting the White Balance])

Menu Setting Screen

For configuring various settings.
Press the [MENU] button to display the menu setting screen.
(A Page 66 [Basic Operations in Menu Screen])
[Main Menu] Screen

Alarm Display

● Alarm is displayed during the status screen display in
Camera mode (STATUS 0, 1, 4) and Media mode. If the
alarm sounds during STATUS 2 or 3 Screen display in
Camera mode, the display will return to STATUS 0 Screen
and alarm will be displayed. (A Page 122 [Error Displays
and Actions])
30/24 fps
A
1min
B 1min
STBY
RES
Alarm Display Area

Zebra Pattern Display

Two types of zebra patterns that indicate the luminance level
of the video image can be displayed on this camera recorder.
You can set the luminance levels for displaying the two types
of zebra patterns.
(A Page 50 [Setting Zebra Pattern])
Zebra Pattern
Memo:
● Use the [ZEBRA ON/OFF] switch in front to turn ON/OFF
the zebra pattern display.
● Set the display pattern and luminance level in [LCD/
VF]B[Shooting Assist]B[Zebra]. (A Page 83)
MAX 123%
MIN 45%
S.DTL
B -3
A<3200K>
F5.6 AE+1 9dB 1/10000