Auto White Balance Indication (Camera Mode Only); Menu Setting Screen; Alarm Message Display; Safety Zone Indication (Camera Mode Only) - JVC GY-HD250U - 3-ccd Prohd Camcorder Instructions Manual

e_hd250.book Page 30 Tuesday, October 24, 2006 3:11 PM
CONTROLS, INDICATORS AND CONNECTORS
Indications on the LCD Monitor
and in the Viewfinder (Cont'd)
Auto White Balance Indication
(Camera mode only)
The AUTO WHITE indication and the result of the operation are dis-
played during the auto white balance adjustment operation.
X See "White Balance Adjustment" on page 52.

Menu Setting Screen

Screen used for making various settings.
The Menu Setting Screen appears when the STATUS button is
pressed for 1 second or more.
X See "Setting Menu Screens" on page 75.
TOP MENU screen (Camera mode)

Safety Zone Indication (Camera mode only)

The indication of the following safety zone and center mark indications can be turned ON/OFF with the SAFETY ZONE item and CEN-
TER MARK item on the LCD/VF[1/4] menu screen. X See page 89.
In addition, the safety zone display is on or off depending on the REC item setting and the ASPECT item setting in the VIDEO FORMAT
menu screen, as shown below.
SAFETY ZONE OFF
CENTER MARK
REC ASPECT
DV-60I
DV-50I
4:3
DV-24P
DV-24PA
DV-25P
16:9
HDV-HD60P
HDV-HD50P
HDV-HD30P
[16:9]
HDV-HD25P
HDV-HD24P
30
4:3
- OFF ON

Alarm Message Display

• The following alarm messages are displayed while the STA-
TUS (0, 1, 4) screen is shown in the Camera mode, or a STA-
TUS screen is shown in the VTR mode.
If an alarm is generated while the STATUS 2, 3 screen is
shown, the STATUS 0 screen returns to display the alarm.
X See page 106.
• When an abnormality occurs in the VTR, a warning message
with an error code is displayed.
X See pages 106-108.
Alarm display area
14:9 16:9
OFF ON OFF
16:9+4:3
ON OFF ON
Cannot be selected