Switch Set Item - JVC LST0904-001B Instruction Manual

Menu Display and Detailed Settings
Camera Function Menu
(continued)

Switch Set Item

* Default values are indicated in bold characters.
Item Setting Values
FAW None
PRESET
A
B
GAIN L ALC, 18dB, 15dB,
12dB, 9dB, 6dB, 3dB,
GAIN M
0dB
GAIN H
USER1 By assigning one of the following functions to each of the [USER1]/[USER2]/[USER3] buttons, these buttons can be
used to control the assigned function (on/off, start, switch).
USER2
Set according to the shooting conditions. Functions can be assigned only in Camera mode.
(Default values USER1: Bars, USER2: B.Compress3, USER3: Load File)
USER3
None
Preset Temp.
Bars
Load File
Clip Review
B.Stretch1
B.Stretch2
B.Stretch3
B.Stretch4
B.Stretch5
B.Compress1
B.Compress2
B.Compress3
B.Compress4
B.Compress5
LENS RET Clip Review
OK Mark
Focus Assist
Clip Review Last 5 sec
Top 5 sec
CLIP
For assigning the FAW (Fulltime Auto White Balance) function to a position on the [WHT.BAL]
selection switch.
This is fixed at FAW when the [FULL AUTO] switch of the camera recorder is set to ON .
None
PRESET : Assigns FAW to the PRESET position.
A
B
For setting the gain value of each position on the [GAIN] selection switch.
This is fixed at ALC when the [FULL AUTO] switch of the camera recorder is set to ON .
(Default values GAIN L: 0dB, GAIN M: 9dB, GAIN H: 18dB)
Setting Values
No function is assigned.
Assigns the function of [Preset Temp.] under [White Balance] in the [Camera Process] menu.
(A Page 79)
Assigns the function of [Bars] in the [Camera Function] menu. (A Page 73)
Assigns the function of [Load File] in the [Setup File Manage] menu. (A Page 89)
Assigns the Clip Review function. (A Page 52)
Assigns the functions of [Stretch Level] and [Compress Level] under [Black Toe] in the
[Camera Process] menu. (A Page 76)
For assigning a function to the [RET] button on the lens. This function does not work if the [RET]
button is not available on the lens in use.
Clip Review
OK Mark
Focus Assist
For specifying the operation when [LENS RET] is set to Clip Review .
Last 5 sec : Views about 5 seconds of the clip from the ending.
Top 5 sec : Views about 5 seconds of the clip from the beginning.
CLIP
Memo:
● Selectable when [LENS RET] is set to Clip Review , or when any of the [USER1]/[USER2]/
[USER3] buttons is set to Clip Review .
: FAW function is not assigned.
: Assigns FAW to the A position.
: Assigns FAW to the B position.
: Assigns the Clip Review function to the [RET] button. (A Page 52)
: Assigns the OK mark function, which operates during shooting, to the [RET]
button. (A Page 54)
: Assigns the Focus Assist function to the [RET] button. (A Page 35)
: Views the entire clip.
Function
Description